Xantrex Freedom XC2000-230V, Owner'S Manual, Page: 10 / 106

Product Safety Information
x Freedom XC 2000 - 230V Owner's Guide
WARNING
FIRE AND EXPLOSION HAZARD
n
Unit’s components may produce arcs or sparks.
n
Do not install near batteries, in machinery space, or in an
area in which ignition-protected equipment is required.
Failure to follow these instructions can result in death, serious
injury, or equipment damage
.
Areas include any space containing gasoline-powered machinery,
fuel tanks, as well as joints, fittings, or other connections between
components of the fuel system.
WARNING
ELECTRICAL SHOCK HAZARD
n
Replace the wiring compartment cover before turning on
power to this equipment.
n
Use a torque screwdriver to tighten the captive nut panel
screw to 0.56 N-m torque to ensure a proper earth
connection and a required tool access to the wiring
compartment.
Failure to follow these instructions can result in death, serious
injury, or equipment damage
.
CAUTION
ELECTRICAL SHOCK AND FIRE HAZARD
n
Do not open. No serviceable parts inside. Provided with
integral protection against overloads. Bonding between
conduit connections is not automatic and must be
provided as part of the installation.
n
Read guide before installing or using.
n
Do not cover or obstruct ventilation openings.
n
Do not mount in zero-clearance compartment –
overheating may result.
n
Do not expose to rain or spray. This inverter/charger is
designed for marine applications only when additional drip
protection is installed in certain orientations. See
"Approved Mounting Orientations" on page 25 for more
information.
n
Install an RCBO (Type B) only as required by local
regulations.
n
Do not connect AC OUT to any other source of power.
Damage to unit may occur.
n
For AC IN and AC OUT, use wires suitable for at least
75°C.
Failure to follow these instructions can result in injury or
equipment damage.