
iv
Freedom XC 2000 - 230V Owner's Guide
Purpose
The purpose of this Owner’s Guide is to provide explanations and
procedures for installing, operating, configuring, maintaining, and
troubleshooting a Freedom XC 2000 - 230V Inverter/Charger for
Recreational, Commercial and Fleet Vehicle, or Marine
installations.
Scope
The guide provides safety and operating guidelines as well as
information on installing and configuring the inverter/charger. It
also provides information about troubleshooting the unit. It does
not provide details about particular brands of batteries. You need
to consult individual battery manufacturers for this information.
Audience
The guide is intended for users and operators of the Freedom XC
2000 - 230V Inverter/Charger.The Installation section starting
is intended for qualified personnel.
Qualified personnel have training, knowledge, and experience in:
l
Installing electrical equipment.
l
Applying all applicable installation codes.
l
Analyzing and reducing the hazards involved in performing
electrical work.
l
Selecting and using Personal Protective Equipment (PPE).
Abbreviations and Acronyms
A
Amperes
Ah
Amp-hours (a unit of battery capacity)
AC
Alternating Current [
V
]
ACC
Accessory in vehicle ignition system
AGM
Absorbed Glass Mat (a battery type)
BTS
Battery Temperature Sensor
CVCC
Constant Voltage Constant Charge
DC
Direct Current [
Z
]
h
Hours (a unit of time)
Hz
Hertz (a unit of frequency)
kW
Kilowatts (1000 watts)
LBCO
Low Battery Cutout (or Cutoff)
LCD
Liquid Crystal Display
LED
Light Emitting Diode
LFP
LiFePO
4
(lithium iron phosphate – a battery type)
m
Minutes (a unit of time)
max
Maximum
min
Minimum
ms
Milliseconds (a unit of time)
N-m
Newton-meters (a unit of torque)
Summary of Contents for Freedom XC2000-230V
