Xante CL30, User Manual

Page: 198 / 238

Chapter 11 - Troubleshooting • 190
Cannot print.
•
PRNUSBX WRITE ERROR
is displayed.
Printing is slow.
Printer requests paper size change to continue printing.
Possible cause Rem edy
Interface is disabled. In the printer menu settings, enable Parallel or
USB interface.
Printer is switched OFF. Switch ON.
Printer interface cable is
disconnected. Reconnect the printer interface cable.
A converter, buffer,
extension cable or USB
hub is being used. Test by connecting printer and computer
directly.
Printer driver output port
is incorrect. Set correct output port to which the printer
interface cable is connected.
Printer is not selected in
the printer driver. Select the printer or set to default printer.
Incorrect printer driver is
being used. Delete this printer driver and install correct
printer driver.
Possible cause Rem edy
Print processing is carried
out by the computer. Use a computer with a faster processor.
Set lower print resolution in the printer driver
Data is too complex. Simplify data.
Possible cause Rem edy
Paper loaded in tray is
different size from that
formatted in software
application. Either change paper in tray to match size
formatted in application and press ONLINE to
continue, or continue printing on existing paper by
pressing ONLINE.