another ten times then click S2 to confirm. A factory reset will occur after 10 LED blinks all
previously saved values will be erased.
● If at any time you are unsure as to how many times you have clicked a button, turn the power off
then back on, wait for the device to return to normal operation, and begin the process again.
The following table can be used to quickly reference how many clicks are required to set each parameter.
See the documentation below for details.
Number of
S1 clicks
Node
Processing Unit
LED Verification
Factory Defaults
1
Node ID
Motion Threshold
Node: See back of node
PU: Threshold = 4
2
Channel
Channel
1
3
LED Indicators
LED Indicators
2 (On)
4
Number of Nodes
Number of Nodes
6, 10 or 15 depending on
the kit
5
PAN
PAN
1
6
Channel Shift
Channel Shift
1
7
N/A
Trigger Count
1
8
N/A
Trigger Period
6 (60 seconds)
9
N/A
Quick Reset
2 (On)
10
Factory Reset
Factory Reset
N/A
11
N/A
Last outage
N/A
12
N/A
Jam Detection
1 (Off)
13
Node firmware version
PU firmware version
N/A
15
N/A
Reaction
3
16
N/A
Convergence
3
Table 2: Parameter selection guide
How to change the motion detection sensitivity threshold (PU Only)
The PU has an adjustable motion detection threshold. Lower threshold values will trigger easier than
higher values. Good threshold values are highly dependent on the node density of the sensing network.
For example, 10 nodes surrounding an area of 2,000 square feet will have lower thresholds than 10 nodes
in a space of 1,000 square feet.
Copyright © 2015 XANDEM
TMD User Guide (Rev C.2) Page 14
