If finding the cause of a false trigger becomes difficult, consider installing a
TMD Data Logger
. Contact
us at
for more information about the data logger.
What do I do if a node or processing unit is indicating a status error via the
LEDs?
Please review the LED Status Indicators section of this document. Status errors are the result of:
1. Nodes and PUs configured incorrectly try factory resetting the devices and trying again.
2. Nodes and PUs are spaced too far apart try condensing the network.
3. Nodes and PUs are receiving interference from other wireless devices try changing the channel
of each node and PU.
What do I do if I break a node?
If a node is broken, you can:
1. Purchase an extra device as a replacement. The serial number located on the back of the circuit
board inside the plastic enclosure will be required.
2. Reconfigure the number of nodes and node IDs as described in the configuration section of this
document.
Copyright © 2015 XANDEM
TMD User Guide (Rev C.2) Page 23
