5
5
The Epson SpectroProofer
™
is an optional in-line color measuring system
that can be installed on the Epson Stylus
®
Pro 7900 and 9900 printers.
When driven by the latest software RIP front-ends, the SpectroProofer can
automate virtually any color management process in your workflow.
Follow the instructions in this guide to install the SpectroProofer in your
printer. This guide also provides maintenance and troubleshooting
information. Once you’ve set up the SpectroProofer, follow the instructions
that came with your color measuring software to use the equipment.
Handling and Product Information
Exercise care when handling the spectrophotometer, calibration tile, and
backing plates. If they become scratched or soiled, your color measurements
may be affected.
Note that the spectrophotometer and tile come as a numbered set; they have
been calibrated to work together. If you purchase two or more products, be
sure you use the same numbered pieces together.
Introduction
Caution:
Do not touch the lens; it
can be easily scratched.
Avoid touching the white
surface of the tile and
backing plates.
Backing plate
Lens
Calibration tile
Label on
spectrophotometer
Label on tile
Summary of Contents for SpectroProofer
Page 1: ...Setup and Maintenance ...
Page 4: ... 4 4 Contents ...
Page 6: ...6 6 Introduction ...
Page 20: ...20 20 Setting Up the SpectroProofer ...
