Tel. +49 (0) 86 41- 69 48 - 60 | www.x-gloo.com | [email protected]
9
Step 4: Inflate two Tubes opposite one another.
Step 5: Inflate the third Tube so the tent will begin to rise.
Step 6: Using the Setup Support Bar to raise an 8x8 X-Gloo.
SETUP USING THE PROTECTION FOIL
Follow these setup instructions if using our
optional Protection Foil to help prevent
soiling or damaging your X-Gloo during setup.
Step 1:
Lay out the Protection Foil where
you want to set up the tent and roll
the Matrix out on top of it
(1)
.
Step 2:
Position two Tubes opposite one
another in a half-circle and then
inflate with air
(2)
. Inflate the
remaining two Tubes as described
in the regular setup process.
Step 3:
Position the Tube ends at the edges
of the Foil so that grommets on the
inside of the Tube ends rest exactly
over the grommets of the
Protection Foil
(3)
.
Step 4:
Remove the Protection Foil and
anchor the tent using one or more
of the methods described on pages
10-13.
3.
INFLATE
Step 1:
Make sure that the pump hose is equipped with the correct
adapter for the Valve.
Step 2:
Connect the hose to the pump and then connect the hose end
with the adapter to the Inflation Valve on the X-Gloo Tube.
Step 3:
Now start the pump by turning the switch to ON.
Step 4:
First inflate two Tubes opposite one another to form a
180° semicircle.
Step 5:
Next inflate the Tube between those inflated in Step 4.
The tent will begin to rise off of the ground.
Step 6:
Now you can inflate the final Tube. With the 8x8 it is
recommended to work with two people. One person lifts
the Tube intersection at the middle of the Roof and sets
the fork of the Setup Support Bar directly under one of
the Tubes in the area of the Tube intersection. The second
person operates the pump, moving it as necessary with the
Tubes as they are inflated.
Step 7:
Close the Inflation Valves after inflating the Tubes.
Step 8:
If the Tubes have been inflated correctly, the X-Gloo will
stand in a stable and wrinkle-free position. All four Tubes
can now moved by hand to the final position.
3
2
1
For more information, watch our how-to video at:
www.x-gloo.com/en/experience/videos/