Tel. +49 (0) 86 41- 69 48 - 60 | www.x-gloo.com | [email protected]
Opening and securing the Entrance Wall
The Entrance Wall is zipped on as described above in
Attaching the
Side Walls
. To hold the Entrance Wall Open, open the zipper in the
middle of the Wall and gather each side together. On each side of
the Entrance Wall you will find a toggle button on a length of cord.
Fasten each side by inserting the toggle button through the loop of
cord across from it
(4)
.
Folding over the Side Walls
to make Half Walls
(5)
In order to secure the Side Wall in a horizontal half-open / folded
position and prevent it from completely opening, the zipper puller
on each side of the wall should be fixed to the small velcro strips
on the inside of the tent roof
(6 & 7)
.
Preventing strain/damage to the Side Wall zippers
If the Side Walls are exposed to high pressure (if the tent is set up
in an area with high winds for example), the zipper will bear the
strain. This is especially true for where the zippers are attached to
the tube ends. To relieve strain to the zippers and to avoid damage
to the X-Gloo or the Side Walls, you will find straps and buckles lo-
cated at the base of each Side Wall. Connect these to the webbing
loops provided on the tube ends
(8)
. Tighten each strap until the
tension on the zipper is relieved
(9)
.
15
5
6
8
7
9
