Tel. +49 (0) 86 41- 69 48 - 60 | www.x-gloo.com | [email protected]
21
REPAIR
BLADDER REPAIR
Our
Adhesive Repair Patch
(70 x 50 mm) resists perforation,
is stretch-durable and has been developed especially for repair
of tears and holes in the Bladder.
• High adhesion guarantees impermeability
• Resistant to UV exposure
• Easy to trim
• Resistant to moisture, sand, salt, wind and high temperatures
Step 1:
Clean the dirt or oil from the area to be repaired using the
Cleaning Cloth included
(5)
.
Step 2:
Trim the Adhesive Repair Patch to the desired size and
carefully remove the protective layer. Try to avoid touching
the sticky surface
(6)
.
Step 3:
Press the Repair Patch onto the repair area and make sure
that there is sufficient overlap of the repair area. An overlap
of at least 50 mm is recommended for larger tears or holes.
PLEASE NOTE:
Press the Repair Patch uniformly and forcefully
(more pressure means that the tape will adhere more quickly).
Step 4:
Allow the area to dry for several minutes
(7)
– done.
REPLACEMENT OF THE PROTECTION STRIP
Protection Strips are fitted with velcro to all four Tube endings of the
X-Gloo,
(8)
as well as to the Tube endings of the optional Canopy. To
replace, simply remove and attach the new one
(9)
.
!
!
All functions, maintenance, and eventual repairs should only be carried out to the degree described in
these operating instructions. Please contact your X-GLOO Team for repairs exceeding these instructions!
Adhesive Repair Patch
5
6
8
7
9
