Skywalk GmbH & Co. KG - Windeckstraße 4 - 83250 MARQUARTSTEIN | GERMANY
20
TAKEDOWN / CLEANING
TAKEDOWN
Make sure that all of the Tent Pegs are removed and all Anchoring
Lines are released before deflating the Tubes on your X-Gloo.
Step 1:
Remove all elements (e.g. Side Walls, Canopy, etc) which
are attached to the X-Gloo.
Step 2:
Next, open the Overpressure Valve on each Tube
(1)
. The
air will completely escape within minutes.
Step 3:
Then turn the X-Gloo inside-out, so that the tube
intersection loop is facing outwards
(2)
.
Step 4:
Lay the Tubes on top of one another, with the Valves facing
upwards. The Roof should be drawn outwards in large folds
(3)
.
Step 5:
After the last of the air has escaped, roll up the X-Gloo
from the Roof to the Tube endings
(4)
.
Step 6:
Now the X-Gloo can be packed in the X-GLOO Multifunction
Transport Bag or Trolley. Side Walls can be stored separately
in the protective Side Wall Bag included in delivery.
!
CLEANING
Dirt and stains should be removed
without
the use of soap or
water whenever possible. We recommend using a soft, dry brush or
microfiber cloth. If the stain cannot be brushed away, then use a
small amount of conventional soap mixed with lots of water.
Important information for digitally-printed parts!
Digitally-printed elements should NEVER be cleaned with soap
and water. Wetting these elements to clean them could result
in the printing becoming permanently damaged. In these cases,
X-GLOO will not accept liability.
CAUTION:
Never use solvents, detergent, steam cleaning or
gasoline! This destroys the cloth.
The X-Gloo should be inspected visually and for functionality at
least once a year by an expert. This inspection includes inflating
the X-Gloo Tubes in order to check all pressure-bearing parts for
tears, punctures, debonding, heat- or chemical damage.
All functions, maintenance, and eventual repairs should only
be carried out to the degree described in these operating
instructions. Please contact your X-GLOO Team for repairs
exceeding these instructions!
1
2
3
4
For more information, watch our how-to video at:
www.x-gloo.com/en/experience/videos/
!
!
