Skywalk GmbH & Co. KG - Windeckstraße 4 - 83250 MARQUARTSTEIN | GERMANY
12
STABILISATION
STABILIZATION WITH WATER BALLAST BARRELS
The
Water Ballast Barrels
can be used as anchors for your X-Gloo,
as seating, or as both.
Step 1:
Open the two valve covers on the Ballast Barrel. Make sure
that the check valve at the bottom of the barrel is closed
so that no water or air can escape when filling
(1)
. Push
open the check valve at the top of the barrel so that air
can escape.
Step 2:
Connect the included hose to the valve at the base of the
Barrel and fill with the desired amount of water (up to
80L).To give the barrel a cleaner appearance, the remaining
space in the Barrel can be then filled with air using one
of our Electric Pumps. The hose provided with the Ballast
Barrels is connected to the Pump in place of the Pump‘s
yellow hose.
Step 3:
Disconnect the hose from the Barrel and make sure that
both valves are tightly closed.
Step 4:
With the help of an assistant, carry the Ballast Barrel to
your tent location by lifting it by the handles. Or, if you
are on your own, tip the barrel onto its edge and roll it.
Connecting to your X-Gloo
Ballast Barrels are connected to the X-Gloo by use of an included
shackel. When connecting one or two Ballast Barrels to each Tube,
use the shackle to attach the eyelet at the base of each Ballast
Barrel directly to the large gromet at the base of the Tube
(2)
.
When using three Ballast Barrels on each Tube, the No-Rub Mat
should be used. Connect the center eyelet on the No-Rub Mat
to the Tube grommet. Then set the three barrels on the mat and
connect each barrel to one of the three eyelets on the mat.
Digitally-Printed Cover
(3)
The Ballast Barrels can be uniquely branded through the use of the
Digitally-Printed Cover. Simply slip the Cover over the barrel and
close the zipper.
To Empty
To empty the Ballast Barrel, simply unscrew the
lower valve cover and push open the check valve.
For more information, watch our how-to video at:
www.x-gloo.com/en/experience/videos/
1
2
3