X – 60 Instructions Version 1.0
Page 26
C4)
Secure the hinge pin with the 2-56 screw. Be
careful not to strip the hole for the screw – don’t
be a gorilla here.
C5)
Repeat C1 through C4 for the left side.
ASSEMBLE CONTROL ARMS TO THE TRUCK
C6)
Bag C contains two brass bushings. When these photos were taken, only the
plastic prototypes were available. Insert the brass bushings into the rear of the
chassis, one on each side of the transmission box. Photos show the
transmission out for clarity.
C7)
Place the Lunsford Ti hinge pins in the two rear control arms. Insert the front end
of the hinge pins into the bushings. Check the Tuning Section and Set-Up
sheets. Here we have placed spacers in front of the arms and behind them.