X – 60 Instructions Version 1.0
Page 12
BAG A
TRANSMISSION ASSEMBLY
Let’s do this first because the parts are right in front of us.
CLEAN IT UP!
A1)
We suggest you clean and inspect all your T4
transmission parts at this time. You might want to
re-build the diff. If you re-lube the bearings, make
sure the outside is clean and dry so they do not
attract dirt. You need the following items from your
T4: the assembled diff with both outdrive bearings
(6903), the idler gear (9360) with its shaft (9361)
and two 3/16 X 3/8 bearings (6906), and the top
shaft (9601) with its spacer (9602) and two 3/16 X
3/8 bearings (6906).
ASSEMBLE THE X – 6 TRANSMISSION
A2)
Remove the transmission case
from Bag A and separate the two
halves. Note the small round ejector
pin bosses on the mounting tabs. You
may wish to file these flat for ease of
installation in the truck.