WYTRON CD-398, Operation Manual

Page: 25 / 58

25
5.8 Load (if HDD installed)
Function only exists when there is a hard drive installed.
Please use “Load” function to load master data before
doing duplication or other function. If the master is
preloaded, please switch to correct partition to copy or do
others.
Place the master disc into the CD/DVD-ROM drive, the
duplicator will automatically detect and analyze the master
and load it into the current partition of hard drive.
Hard drive installed on duplicator will be automatically
partitioned by 850MB (CD writer installed) or 4.8GB (SL
DVD writer installed) or 9.6GB (DL DVD writer installed) in
each partition (Please refer to HDD Partition Size for more
detail). Number of partitions available depends on the hard
drive’s capacity. No pre-formatting or software setup is
required to install the hard drive with Wytron’s controller
card. Each partition in hard drive will be labeled in
alphabetical order starting from AA, AB, AC…etc. Current
partition number can be selected under “hdd partition
group” in the Setup menu.
Duplicator will prompt you an error message when you try
to copy from a partition that contains no data. Switch to
proper partition to copy or use “Load” function to load the
master data to current partition.
5.9 External
When choosing External function and press GO button to
activate, the duplicator will release the control of devices
installed on duplicator and then the drive internally