WYTRON CD-398, Operation Manual

Page: 42 / 58

42
at “Begin track” and press once again GO at “End track” to
exit. Duplicator will start loading those music tracks selected
into the current partition of hard drive. After finishing loading,
the master disc will be ejected automatically and LCD will
display the message of “Pass”. You may change the master
disc and run the Edit function again to gather more music
tracks from different master discs. When finishing the
collection, switch the function to Copy and place blank
CD/DVD discs into writers for copying.
If there is no hard drive installed and when selection of
music tracks from the master disc in CD/DVD-ROM drive is
completed, the duplicator will prompt you the message:
Finalize
[+] No
[Quit]
If there are still other tracks need to be collected, the setting
of Finalize must be “No”. Press GO switch to quit and the
duplicator will start to copy directly the selected tracks onto
blank discs. After finishing the copy, the master disc will be
ejected automatically and prompt you “Pass” in the LCD
display. You will note that the target discs in writers will not
be ejected at this moment. You can change another master
disc in the CD/DVD-ROM drive. Duplicator will analyze the
master disc and bring you to the “Begin track” message on
LCD again. You can repeat the procedures described above
to collect more tracks from another master disc. If this
master disc is the last one that you collect, change the
setting of Finalize to “Yes” and press GO switch, duplicator
will start to copy and close the target discs in the writers. If
all of discs pass copying, they will be ejected from the
writers automatically.
Please study the following examples carefully and follow the