WYTRON CD-398 Operation Manual Download

Page: 55 / 58

Change the option of “CD-ROM drive” to switch the
present CD/DVD-ROM into another one for testing.

4Q: Switches do not function.

A:

Maybe still busy on task.

B: Switch

blocked.

Button malfunction.

Faulty board.

Screws too tight for the button board.

5Q: COPY completed but CD/DVD disc is not readable /

executable?

A: Use Compare function to check.
B: Change another CD/DVD-ROM drive to test.

6Q: The failed rate is high.

A:  Lower the speed of writers and try again.
B:  Quality of blank disc is poor.
C:  Check for latest BIOS version, if on new installed machine.

7Q: Can’t boot-up or fail to upgrade BIOS.

A: Contact your dealer to solve the problem. Please note you

may be charged for this.

B: Check the BIOS program is correct since normally

customer will download wrong program or simply write the
zipped file to CD that should be first unzipped before
writing.

C: Failed upgrade might cause boot failure, returning the

control cards to agent or factory directly to solve the
problem.

Summary of Contents for CD-398



























































Search results

Summary of Contents for CD-398

Reviews:

Related manuals for CD-398

Brands by name

Popular brands

WYTRON CD-398, Operation Manual

Search results

Summary of Contents for CD-398

Reviews:

Related manuals for CD-398

Brands by name

Popular brands