WYTRON CD-398, Operation Manual

Page: 43 / 58

43
instructions step by step. You will find it is very easy to
collect tracks by the duplicator.
Example 1 : To make collection from two masters with hard
drive installed.
No.1 master disc:
2, 4, 6-8 songs.
No.2 master disc: 3-6, 9, 13-16 songs.
a. Switch to Clear Master function and press GO switch
to clear data in the existing partition of hard drive.
b. Switch to Edit function.
c. Place No.1 master disc into CD/DVD-ROM drive
under the EDIT function and wait for duplicator to
analyze it.
d. Press MODE switch to number 2 at “Begin track” and
press GO switch to quit.
e. When “End track” is displayed on the LCD, press GO
switch to quit directly since first song number is 2.
f. Press MODE switch to number 4 at “Begin track” and
press GO to quit.
g. When “End track” is displayed on the LCD, press GO
switch to quit directly since the first song number is
already 4.
h. Press MODE to number 6 at “Begin track” and quit.
i.
Press MODE to number 8 at “End track” and quit.
j. Press GO switch directly to following “Begin track”
and End track” selection to finish the track selection
on No. 1 master disc.
k. Duplicator will start to collect the tracks that you
selected just now into current partition of hard drive.
l. After loading is finished, duplicator will eject your
master disc and show “Pass” on LCD.
m. Place No.2 master disc into CD/DVD-ROM drive and
continue the selection from second master disc.
n. Repeat procedures (d) to (j) above.