WYTRON CD-398, Operation Manual

Page: 28 / 58

28
6.1.2 Write Method
This setting controls the writing methods of CD/DVD disc
including “Disc at once” or “Track at once”. “Disc at once”
will be the default setting. Some writers may support
different writing methods. If the method selected is not
supported, duplicator will automatically switch to the other
one.
Press MODE will change the option of setting and GO to
bring you the next setting.
6.1.3 CD Write Speed
This setting controls the maximum CD writing speed of
writers. Default setting is “32” which will use 32X write
speed to write the CD disc. The reason why it isn’t set to
max is that the CD-ROM readers in the market cannot
access the master disc as fast as the write speed if the
write speed reaches 40X or above. Sometimes maximum
write speed will cause high failure rate that may be due to
poor CD quality or unstable CD writing in high speed. If
installed CD-ROM’s reading speed can reach higher or
even lower, please increase or lower the CD writing speed
manually to get higher successful rate in writing. Press
MODE to change the option and GO to exit.
6.1.4 DVD Write Speed
This setting controls the maximum writing speed of DVD
writers. Default setting is “MAX” which will use the fastest
writing speed of writers. Sometimes maximum writing
speed may have higher failure rate that may be attributable