Wyse Customer Support
QSG - WSI 1.3.6 v3.doc
Pager 8 of 15
TFTPD (Figure 7)
i. Setup TFTPD. From “Start”, go to run and browse
C:\inetpub\ftproot\rapport\tools\sa\util and run the file TFTPD32.exe.
ii. Enter the following information in the TFTPD32 settings screen (Figure 7)
•
Security = None
•
Server Configuration
o
Timeout = 3
o
MAX Retransmit = 40000
o
TFTP Port = 69
•
Base Directory
o
C:\InetPub\FTProot\Rapport\Tools\sa
•
Advanced TFTP Options
o
Option Negotiation = Enabled
o
Show Progress bar = Enabled
o
Activate Tftpd32 on this interface = Enable
iii.
Click “OK” and close the window.
Figure 7 - TFTDP Settings
Figure 8 - DHCP Turbo settings
DHCP Turbo (Figure 8)
DHCP Scope need not be set, but here are the recommended parameters:
Scope Information:
Start Address: 10.1.1.13
End Address: 10.1.1.20
Mask:
255.255.255.0
Lease: 6 Hours or less
