Wyse Customer Support
QSG - WSI 1.3.6 v3.doc
Pager 7 of 15
WSI
INSTALLATION ON A
W
INDOWS
XP
P
ROFESSIONAL
M
ACHINE
Follow these three steps:
1. CONNECT:
Connect your Windows XP Professional machine
and
the device(s)
you need to re-image via a simple hub, unmanaged switch or a
crossover cable
. Verify that the Thin Client has power, a monitor,
keyboard and mouse attached, but it’s NOT powered-on. During the WSI
installation, a Proxy server is installed. If the devices are not connected, a
loopback network connection is created and you will not be able to image
your devices.
Note: Disable all software firewalls and antivirus.
2. INSTALL:
Install the required software components IIS, FTP, DHCP and WSI.
Note
: For this example we are using DHCP turbo. This program is not
supplied nor supported by Wyse.
3. CONFIGURE:
Configure TCP/IP properties, TFTPD, DHCP turbo and FTP in that order.
TCP/IP properties (See Figure 6)
Set the TCP/IP properties for the alternate configuration as follows:
IP address:
10.1.1.12
Subnet mask:
255.255.255.0
Default gateway:
10.1.1.254
Figure 6 - Alternate Configuration Settings.
