Wyre Storm AMP-001-010 Instruction Manual Download Page 13

Page: 13 / 32

Technical Support: [email protected] US: +1 866 677 0053 EU: +44 (0) 1793 230 343

BASIC MA

TRIX AND EXTENDED MA

TRIX

11iii. Basic Matrix

11iv. Extended Matrix

4x4, 6x6, 8x4 or 8x8 Pro Plus Matrix Solution

Add 4, 6 or 8 centralized sources while maintaining full AMP integration as

a Amplifier, Receiver, Transmitter and repeater for even greater flexibility for

residential and commercial applications.

HDBaseT Output on Each Matrix Output

Same cable transmission as a basic single source system,

with the same advantages of HDBaseT technology… multiplied.

AMP as HDBaseT Receiver…

and Then Some

Each AMP performs the same transmission

receiving functions of centralized sources as

an RX70-IR-PP Display Receiver, but adds

ARC, personal audio input, Stereo breakout

to local amplification and 2.1 audio breakout for

greater options at the display end.

Personal Audio Connection with Overlay

Local audio input can overlay the central source video for additional audio options, such as internet radio sports

commentary over a live satellite broadcast, or jukebox over TV news or a Blu-Ray movie.

Same IR receiver function

IR receiver “eye” on displays now handles

AMP function, matrix switching function & central source control.

As Easy as Single Source Transmission

The same principle as a single source with a single transmitter,

but with the matrix multiplying that process for multiple outputs.

HDBaseT Output on Each Amp

Extend distribution as AMPs also function as a repeater to

transmit signals a further 70m/230ft to the next Amp in the

chain, then another, and another...

IR RX at Display Location

Control of all multiple sources, AMP functions

and matrix control at each display location.

Larger Distribution

With 7 AMPs per matrix output, a

network of up to 56 screens is easily

achievable with an 8 output Pro Plus

matrix, each with localized amplification

and personal audio input where needed.

HDMI with ARC

18V PSU

Cat5e/6

HDMI

hdmi with arc

cat5e/6

18v psu

hdmi

HDMI with ARC

18V PSU

Cat5e/6

HDBT IN

HDBT out

18V PSU

HDBT IN

HDBT out

Cat5e/6

HDMI

hdmi with arc

cat5e/6

18v psu

hdmi

hdbt in

hdbt out

using hdbaset out to

cascade central

source to other amps

using hdbaset out to

cascade central

source to other amps

IR RX

ir rx

IR RX

ir rx

IR RX

ir rx

Summary of Contents for AMP-001-010

































Search results

Summary of Contents for AMP-001-010

Reviews:

Related manuals for AMP-001-010

Brands by name

Popular brands

Wyre Storm AMP-001-010, Instruction Manual

Search results

Summary of Contents for AMP-001-010

Reviews:

Related manuals for AMP-001-010

Brands by name

Popular brands