Technical Support: [email protected] US: +1 866 677 0053 EU: +44 (0) 1793 230 343
23
EDID PRESETS
EDID DIP Switch settings
1 (Down):ON
0 (Up): OFF
X: Either position - does not effect function
13iii. EDID Presets
EDID subject to DIP switch:
settings via PC deactivated
adjustment by unit DIP switch
1 2 3 4
ON DIP
EDID subject to PC: settings
via DIP switch deactivated
adjustment by PC
(Default Factory Setting)
1 2 3 4
ON DIP
EDID set to copy HDMI
OUTPUT EDID
1 2 3 4
ON DIP
EDID set to copy HDBaseT
OUTPUT EDID
1 2 3 4
ON DIP
EDID set to fix 1080p 2ch
stereo 3D
1 2 3 4
ON DIP
EDID set to fix 1080p 2ch
stereo 2D
1 2 3 4
ON DIP
Attention:
Any change to EDID settings will need
a power down and power up cycle via the power
switch.
For convenience and ease of installation,
on the underside of the AMP-001-010 you
will also find the same EDID DIP settings
as well as areas to write the Address of the
AMP unit and the Control Zone it will be
located in.
