Technical Support: [email protected] US: +1 866 677 0053 EU: +44 (0) 1793 230 343
5
6ii. Panel Description - Rear
PANEL DESCRIPTION REAR
1
1
2
3
4
5
6
7
2
3
4
5
5
8
6
6
9
7
7
10
Power ON/OFF switch – lit when powered (standby via remote control handset)
HDMI output – for connection to a local HDMI display device, including ARC return path
Attention:
Maximum number of AMPs that can be daisy-chained is 7
EDID DIP Switch – manual EDID management enables immediate EDID data feedback to the display to
overcome any communication issues encountered between connected devices - includes 3D and Long cable
mode (see EDID settings section)
IR RX control receiver port - for receiving infrared control signals and sending back to centralized source & AMP
function control.
Audio Source LED indication – displays currently active audio source.
L/R Line level local audio source input – 3.5mm mini jack
IR TX control transmitter port - For transmitting infrared control signals from central location to control TV
function.
Audio selected – 2ch stereo or 2.1ch stereo audio selected
18vDC Power input – screw-lock connector (please use power supply provided)
Pre-out Stereo Audio Output (DAC > Digital Analog Converter) for direct connection to external amplifier/AVR
via stereo RCA cables (Note: when external power amplification is used, speakers and Subwoofer should be
connected directly to the AVR).
Audio Source Select button – press to manually toggle through local audio, ARC or HDBaseT audio sources (Lit
for selected)
IR status – confirms IR receiver activity
HDBaseT output – repeats HDBaseT transmission a further 70m/230ft to another AMP-001-010 or RX-1UTP-
IR-70 receiver to end the distribution, including embedded IR/RS232 commands.
1
2
3
4
5
6
7
9
8
10
