Wybron 87250, User Manual

Page: 5 / 29

5
Introduction
Wybron’s Coloram IT system includes mechanical dowsers (Eclipse IT Iris and Eclipse IT
Shutter) and PS Power Supplies, all utilizing the Remote Device Management (RDM)
industry-standard feedback protocol. Offering a wide range of models with easy setup and
use, the Coloram IT system is part of Wybron’s Infotrace Control and Management System
– a new way to manage an entire lighting installation with RDM feedback
The lightweight Eclipse IT Iris dowser slides easily into the gel frame holder of its light
fixture. The compact PS Power Supply
attaches easily to the truss of the lighting rig or
mount into a 19-inch rack.
The DMX512 control signal from the lighting console is connected to the PS Power Supply
and can continue on to additional PS power supplies or other DMX-controlled devices. The
power supply sends power, DMX control signal, and RDM information on a single cable,
eliminating the need for a separate power cable for the dowser.
Eclipse IT Iris dowsers are 100% compatible with all products of the Coloram IT family,
including Coloram IT and CXI IT color changers, PS Power Supplies, and Eclipse IT Shutter
dowsers. Eclipse IT Iris dowsers may be daisy-chained with other Coloram IT devices.
This manual gives step-by-step instructions for preparation, setup, and operation of the
Eclipse IT Iris.
Caution:
The Coloram IT System, including
Eclipse IT Iris, is not compatible with Coloram II
(RAM) or Forerunner systems.
Do not connect Eclipse IT Iris dowsers to Coloram II (RAM) power supplies or
Forerunner power supplies.
Do not connect Coloram II (RAM) units to PS power supplies.
Damage from such action will not be covered by the product warranties.