Wybron 87250, User Manual

Page: 9 / 29

9
Refer to the HEAD-FEET RESTRICTIONS section of this manual for details regarding the
length of cable runs.
5. Connect the power supply to AC power
Plug the AC cord into a non-dimmed power circuit. The power supply automatically
accommodates 100 - 240 VAC (50/60 Hz).
Power at the PS Power Supply is indicated by a red LED indicator.
Caution: Do not power the PS Power Supply from a dimmer. Severe damage
will result and is not covered by product warranty.
6. Connect the DMX512 source
Connect the DMX512 signal source to the DMX input connector on the back of the power
supply using standard DMX cable. Valid DMX signal will be indicated by a flashing green
LED. The dowsers will now open and close their fins according to their respective DMX
signal levels.
[
Alerts Menu] >
[DMX Status]
DMX Address: 512
Settings
>
Sensor Info >
History
Local Control
>
Reset Defaults >
Multiple Alerts Single Alert
Alerts Menu
This menu only displays when
there is an active alert on the
Eclipse Iris IT
Graphical Menu Tree
[Alerts Menu] >
[DMX Status]
DMX Address: 512
Settings
>
Sensor Info >
History
Local Control
>
Reset Defaults
Self Test/demo Mode
Reset Defaults