Wybron 87250, User Manual

Page: 19 / 29

19
Specifications
•
Fin speed (under DMX control):
Fast cut: 1K/7.5”: 0.73 seconds (fully open to fully closed and vice versa)
10”: 0.85 seconds
2K/12”: 1.0 seconds
24”: 2.0 seconds
Cross fade: up to 60 seconds (movement without stopping)
•
Operating modes:
1. DMX512
2. Local wired pendant control
3. Local push button control (push buttons on the Eclipse unit)
•
Number of DMX channels used: One
•
Status Display: Backlit display
•
LED Indicators:
Red: Power
Green: DMX signal
•
Wired Pendant Control Cable:
3 conductor with 3-pin XLR connectors
Up to 1,000 feet long
•
Control Pendant 3-pin XLR connector pin functions:
Pin 1: Connect to common to open the fins
Pin 2: Connect to common to close the fins
Pin 3: Common
•
Current Requirements:
1K/7.5”, 10”, 2K/12”, 24”: 1.0 Amp @ 24 VDC
•
Fuse:
1K/7.5”, 10”, 2K/12”, 24”: 1.5 amp Slo-Blo
•
Mounting Plates:
Various plates available to fit a wide variety of fixtures
(Please refer to Wybon’s Web site at www.wybron.com for details)
•
Fan:
Small, low-speed fan to cool the electronics enclosure
•
Safety Cable:
3.5 feet long cable included
•
Daisy Chaining:
Individual DMX addresses on one home run
•
Power Supply Compatibility:
PS-150 Power Supply (150 watts)
PS-300 Power Supply (300 watts)
PS-600 Power Supply (600 watts)
PS-450i Permanent Install Power Supply (300 watts)
•
Signal Termination: None required (depends on system configuration)
•
Weight:
87250 — 1K/7.5” Eclipse IT Iris: 4.76 lbs/2.15 kg
810060 — 10” Eclipse IT Iris: 7.00 lbs/2.63 kg
812020 — 2K/12” Eclipse IT Iris: 8.00 lbs/3.63 kg
823020 — 24” Eclipse IT Iris: 31.96 lbs/14.5 kg