20
Tool Specifications
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-5.
Typically the A-weighted noise levels of the product are:
Sound pressure level 90 dB(A); Sound power level
101 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
Cutting wood: a
h
=2.5 m/s
2
, K=1.5 m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or insertion tools or
is poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the acces-
sories, keep the hands warm, organisation of work patterns.
EC-Declaration of Conformity
We declare under our sole responsibility that the product
described under “Tool Specifications” is in conformity with all
relevant provisions of the directives 2009/125/EC (Regula-
tion 1194/2012), 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards: EN 60745-1, EN 60745-2-5.
Technical file (2006/42/EC) at:
Adolf Würth GmbH & Co. KG, Abt. PCM,
Reinhold-Würth-Straße 12–17
74653 Künzelsau, Germany
Künzelsau: 31.08.2014
Battery Charging
Use only the chargers listed in the tool specifi-
cations.
Only these chargers are matched to the lithium-
ion battery of your power tool.
Note:
The battery supplied is partially charged. To ensure
full capacity of the battery, completely charge the battery in
the battery charger before using your power tool for the first
time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure
does not damage the battery.
The lithium-ion battery is protected against deep discharging
by the “Electronic Cell Protection (ECP)”. When the battery is
empty, the machine is switched off by means of a protective
circuit: The inserted tool no longer rotates.
Do not continue to press the On/Off switch
after the machine has been automatically
switched off.
The battery can be damaged.
Observe the notes for disposal.
Cordless circular saw
HKS 10-A
Art. No.
5700 103 X
Rated voltage
V=
10.8
No-load speed
min
-1
1400
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
mm
mm
26.5
17.0
Spindle lock
Base plate dimensions
mm
167 x 88
Saw blade diameter, max.
mm
85
Saw blade diameter, min.
mm
85
Blade thickness, max.
mm
0.7
Tooth thickness/setting, max.
mm
1.1
Tooth thickness/setting, min.
mm
1.0
Mounting bore
mm
15
Weight according to
EPTA-Procedure 01/2003
kg
1.4
Permitted ambient temperature
– during charging
– during operation
1)
and during
storage
°C
°C
0...+45
–20...+50
Recommended batteries
0700 996 2XX
Recommended chargers
0700 896 XXX
1) Limited performance at temperatures <0 °C
Marcel Strobel
General Manager
Dr.-Ing. Siegfried Beichter
General Manager
OBJ_BUCH-2300-001.book Page 20 Wednesday, October 22, 2014 12:41 PM
