Würth 1952 003 370, Operating Instructions Manual

Page: 16 / 28

16
INTRODUCTION
It is compulsory to read this instruction manual before starting any
kind of action.
The proper operation and full compliance of this product's
performance is guaranteed only if all the instructions provided in this
manual are closely adhered to.
We guarantee that this product complies with the technical
specifications described in this manual.
The manufacturer shall not be held responsible for any improper
uses other than those described herein.
Use protective work gloves, protective footwear, hard hat and safety
goggles.
Misuse
:
- This product should only be used as described in this
documentation; any other use is considered improper.
- The manufacturer accepts no responsibility for any
damage caused by the incorrect or unreasonable use of
the equipment.
- Moreover, misuse shall also void the warranty.
Take care of your tools:
- Be sure to store your tools in a clean state.
- Place the tools inside their original package.
WARNINGS:
This tool set should be used by experienced
personnel only
Do not use it with a pneumatic screwdriver
At least the following PPE should be worn when
using the tool set
DESCRIPTION
This tool set is a PATENTED and UNIVERSAL solution for removing
and refitting modern hubs with integrated bearing type HBU2 (a
pre-assembled unit combining hub and bearing, i.e. the Hub Bearing
Unit).
METHOD OF PREPARATION
DE
GB
FR
NL
ES
IT
PT
PL
DA
EL
2
3 A
D
B
G
C
E
F
Hbu type hub-bearing to be
replaced like this, already
assembled.
The insertion thrust should take
place in the bearing's outer
groove so as not to compromise
its operation or break it.
Discharge groove
Hub bearing
1