Original Operating Instructions
BATx0100-ES-1-400-1
Operation
O_BATx0100-ES-1-400-1_V3.1_GB
Page
52
of
73
5.3
Enable Switch
Pressing the Enable switch opens the AC and DC circuit breakers.
When all possible errors are eliminated, the Enable switch may be pulled out. The
product restarts operation after the Enable switch has been pulled out and the product
has been reset by means of the higher-level control.
NOTICE: The red-marked area is under voltage when the AC/DC cables are not
disconnected externally (Figure 22). The blue-marked area shows the DC link.
Figure 22: Danger areas
Summary of Contents for BAT 0100-ES-1-400-1 Series
Page 73: ......
