G-14
RCK54/60-24B-EC · RCK60-27B-EC · RC60-24/27BR, WSM
G GENERAL
■
B2710
1. Assemble the lift cylinder kit as shown in figure.
2. Apply grease to the cylinder joint pin (2) and (3).
3. Apply seal tape to the cylinder adaptor (4) and set the direction
as shown in figure.
Tighten the cylinder adaptor with specified torque then rotate
(clockwise) the adaptor to set the specified direction.
4. Assemble the middle lift arm (1) as shown in figure, smaller
clearance toward the RH side of machine.
5. Set the cylinder rod flat face toward the RH side of machine.
W1016196
Tightening torque
Cylinder adaptor
24.5 N·m
2.5 kgf·m
18.1 ft-lbs
Holder mounting reamer
screw
48.1 to 55.8 N·m
4.9 to 5.7 kgf·m
35.5 to 41.2 ft-lbs
(1) Middle Lift Arm
(2) Joint Pin
(3) Joint Pin
(4) Cylinder Adaptor
(5) Cylinder
(6) Holder
(7) Cylinder Rod
(8) Holder Mounting Reamer Screw
A : Clearance 2.0 mm (0.078 in.)
B : Clearance 10.0 mm (0.394 in.)
C : 0.35 to 0.70 rad. (20 to 40 °)
KiSC issued 11, 2006 A
