G-5
RCK54/60-24B-EC · RCK60-27B-EC · RC60-24/27BR, WSM
G GENERAL
5. MAINTENANCE CHECK LIST
To keep the mower working in good condition as well as to avoid any accident and trouble, carry out periodic
inspection and maintenance. Check the following points before use.
W1013580
Service interval
Check points
Reference
Page
Daily (Each use)
• Anything unusual in previous day’s operation
• Make sure mower blade screws are tighten
• Check mower blades for wear or damage
• Check gear box oil level
• Check oil leaks
• Check all hardware
• Make sure all pins are in place
• Clean mower deck
• Apply grease to universal joint
• Apply grease to spindle shafts (Bevel gear shaft and blade shafts)
• Apply grease to belt tension pulley
• Apply grease to belt tension pivot
• Apply grease to front center anti-scalp roller
• Apply grease to lift arms
–
G-6
S-4
G-7
–
–
–
–
G-8
G-8
G-8
G-8
G-10
G-8, 10
Initial 50 hours
• Change gear box oil
G-9
Every 50 hours
• Apply grease to front and rear gauge wheels
• Apply grease to middle lift arm
• Apply grease to lift cylinder joint pin
• Check mower belt
G-10
G-10
G-10
S-4
Every 150 hours
• Change gear box oil
G-9
Every 2 years
(After purchase)
• Replace gear box oil seal
G-11
KiSC issued 11, 2006 A
