S-14
ROTARY MOWER
RCK54/60-24B-EC · RCK60-27B-EC · RC60-24/27BR, WSM
Center Pulley Holder
1. Unscrew the center pulley holder screws (1), and remove the
center pulley holder from the mower deck.
2. Remove the upper oil seal (10) and lower oil seal (8).
3. Remove the internal snap ring (7), ball bearings (4), (6) and collar
(5).
NOTE
■
• The collar (5) adapts to RC60-27BR only.
(When reassembling)
• Replace the oil seals (8), (10) with new ones.
W1019050
Tightening torque
Center pulley holder screw
77.6 to 90.2 N·m
8.0 to 9.2 kgf·m
57.1 to 66.5 ft-lbs
(1) Center Pulley Holder Screw
(2) Gear Box Stay RH
(3) Center Pulley Holder
(4) Ball Bearing
(5) Collar
(6) Ball Bearing
(7) Internal Snap Ring
(8) Oil Seal
(9) Gear Box Stay LH
(10) Oil Seal
KiSC issued 11, 2006 A
