WPG P110C04DC, Operating Instructions Manual

Page: 15 / 36

Rev 29.0/11-19 P1-DC: #35111 13
T
O
A
TTACH THE
P
ADS TO A
L
OAD
Make sure the contact surfaces of the load and vacuum pads are clean (see
“Pad Cleaning” on page 26).
Positioning the Lifter on the Load
1) Center the pad frame on the load.
1
2) Make sure all vacuum pads will fit on
the load and will be loaded evenly.
Consult the Per-Pad Load
Capacity.
3) Place the vacuum pads in contact with
the load surface.
1..... The lifter is designed to handle the maximum load weight when the load’s center of gravity is positioned within 2" [5 cm] of the lifter’s rotation
axis. Uncentered loads may rotate or tilt unexpectedly.
OPERATION