WPG P110C04DC, Operating Instructions Manual

Page: 20 / 36

Make sure load is positioned correctly on lifter (as
previously directed).
Never disengage rotation and tilt latches at the same time,
because this could result in load damage or personal injury.
P1-DC: #35111 Rev 29.0/11-19 18
T
O
T
ILT THE
L
OAD
1)
3A
2A
Make sure the load has enough
clearance to tilt without
contacting anyone or anything.
2) Use a control handle (circled in
fig. 2A) to keep the load under
control.
Unbalanced loads may tilt
unexpectedly when latch is
disengaged.
3) If the pad frame is latched, pull
the tilt release lever (fig. 3A) to
disengage the tilt latch. Then tilt
the load as required.
4A
Note: See “L
OAD
C
HARACTERISTICS
” on
page 9 for information about
allowable overhang.
A load with overhang may force you to
release the control handle as the load
approaches the flat position. In this
case, use a hand cup (circled in fig. 4A)
or other appropriate means to control
the load.
Note: The pad frame automatically
latches when tilted to the vertical
position.
OPERATION