P1-DC: #35111
Rev 29.0/11-19
20
Storing the Lifter
1)
1B
Use the pad covers supplied (fig. 1B) to keep the vacuum
pads clean.
!!–CE–!!
To prevent the lifter from tipping over on relatively horizontal surfaces, place the
vacuum pads facedown on a clean, smooth, flat surface. Then lower the lift bar and place a
support under the lift point.
2) Charge the battery completely and repeat every 6 months (see “B
” on
page 27).
3A
3B
3C
3D
3E
3) Disconnect the electrical connectors (figs. 3A-B and figs. 3C-E) to prevent battery
discharge.
4) Store the lifter in a clean, dry location. Store the battery between 32° and 70° F [0-21° C].
Avoid storage above 100° F [38° C.]
OPERATION
Summary of Contents for P110C04DC
