Rev 29.0/11-19
P1-DC: #35111
19
T
O
R
ELEASE
THE
P
ADS
FROM
THE
L
OAD
Make sure load is at rest and fully supported
before releasing vacuum pads.
1A
1) Press the lever to release the latch and push the valve
handle inward (fig. 1A) to the “release” position (
).
Do not move lifter until pads release completely, because such movement could
result in load damage or personal injury.
2) Before you lift another load, perform the Every-Lift Inspection (see “I
on page 21).
A
FTER
U
SING
THE
L
IFTER
1) Leave the valve handle in the “release” position (
/ power
off
).
2) Charge the battery after each workday as needed (see “B
1
3) Use the hoisting equipment to lower the vacuum lifter gently onto a stable support. Then
detach the hoisting hook from the lift point.
Caution:
Do not set the lifter on surfaces that could soil or damage vacuum pads.
2A
Note: A control handle can be used to support an unloaded lifter when not
suspended (fig. 2A). Make sure the lifter leans securely against an
appropriate support.
4) To transport the lifter, secure it in the original shipping container with
the original restraints or equivalent.
1..... To maximize battery life, charge it promptly after each use.
OPERATION
Summary of Contents for P110C04DC
