15
14
High pressure cleaner WG603E WG604E WG605E
9. pIpe cleANeR kIt ASSembly (WG605e
oNly)
Always use the pipe cleaner together with the lance
extension.
To attach the pipe cleaner to the extension lance align
the ridges on the angle connector with the two grooves
on the extension lance.
Press together and rotate the pipe cleaner clockwise to
secure it.
Pull gently upon the pipe cleaner to confirm it is secure.
It should not pull out.
Removing
Press the pipe cleaner towards the extension lance and
rotate it anti-clockwise to remove it
10. WAll mouNt bRAcket
Wall mount bracket is an optional storage solution.
1. Select and appropriate section of the wall to attach
the wall mount bracket.
2. Locate the studs or exposed wooden beam.
3. Turn the wall mount bracket so the hooks are
pointing upward.
4. Screw the wall mount bracket into the wall using the
four supplied screws.
5. Confirm that the wall mount bracket is securely
fastened to the wall.
11. to AttAch the mAchINe to the WAll (See
fig. S)
1. First pull the knob located on the lower left hand
side of the handle to allow the handle to lay flat
against the machine.
2. On the bottom of the machine are two slots that will
align with the two hooks on the wall bracket.
3. Lift up the machine and slide the hooks into the slots
on the bottom of the machine
OPERATION
connection to the water supply
Attach a suitable water hose with the correct connection
to the water supply and then attach the other end to the
water inlet filter on the washer.
Once, the hose connection is secure, turn on the water
supply.
Alternative water supply
A self priming mechanism allows for the
product to optionally be connected to a bucket
Q
R1
R2
S
T
N2
O
P
L
M
N1
I
J
K
