9
8
High pressure cleaner WG603E WG604E WG605E
Note:
It may require a fair amount of pressure to seat
the tank into the slot.
4. pReSSuRe hoSe ASSembly (oNly foR
WG603e)
To attach the pressure hose to the high pressure
connection, insert the metal connector of the high
pressure hose until it locked in position. (See Fig. E)
After the hose is attached, check the connection by
gently pulling upon the hose. It should not pull out.
5. tRIGGeR GuN ASSembly
1. To attach the pressure hose to the metal trigger gun
located in front of the trigger latch and connecting
port.
Press the latch towards the trigger and insert the
connector of the hose.
Release the latch to lock the hose in place.
Confirm the connection by gently pulling upon the
hose. It should not pull out. (See Fig.F1)
2. Removing
To release press the latch towards the hose and pull
out the hose.(See Fig.F2)
3. Storage
On the side of the handle there is a holster for the
metal trigger gun to be stored in when not in use.
(See Fig. G)
1
2
1
2
H
F1
F2
G
C
D
E
A1
A2
B
1
2
1
2
H
F1
F2
G
C
D
E
A1
A2
B
