9
8
High pressure cleaner WG603E WG604E WG605E
OPERATING INSTRUcTIONS
Note:
Before using the tool, read the
instruction book carefully.
ASSembly
1. uNpAck
Unpack all of that supplied equipment on a clean flat
surface.
Compare and match the accessories and contents of
the box to the accessory list included in the manual.
If you find that parts are missing or damaged do not
use the product and contact your dealer. The use of
incomplete or damaged products is a potential hazard
to people and or property.
2. ItemS Needed foR ASSembly (Not
SupplIed)
Philips screwdriver/Crosshead screwdriver
Water hose with suitable connectors.
3. mAIN ASSembly (See fig. A1 A2)
1) On the left side of the pressure cleaner power
washer above the wheel pull out the knob on the
handle to unlock the lower half of the handle and
raise it upright into a 90 degree angle. (See Fig. A1)
2) Attach the upper half of the handle to the lower half
by sliding it down over the narrower tubing. It will
click when it is secure. (See Fig. A2)
Pull up on the handle to confirm it is secured. It
should not move.
Attachment for the metal gun holster and brush clamp.
Located below the accessory are two screw holes.
Mount the holster so that the brush clamp is in
between the two handle bars with the holster’s
opening facing forwards. Secure in place using the
two supplied screws. (See Fig. A2)
3) Next attach the water filter to the water connection
on the rear of the machine between the wheels by
lining up the threads and rotating in a clockwise
direction. (See Fig. B)
4) When product is not in use the power cord may be
securely wrapped around the accessory bracket for
safe storage. (See Fig. C)
Located on the main body of the product is the
detergent tank. Check that the detergent tank is
properly seated into the slot and that the regulator cap
and hose are connected to the tank. If the regulator cap
is not properly connected depress the regulator cap.
(See Fig. D)
1
2
1
2
H
F1
F2
G
C
D
E
A1
A2
B
