15
14
High pressure cleaner WG603E WG604E WG605E
To attach the rotary brush to the extension lance an
adapter is needed.
Insert the rotary brushe into the open end of the brush
adapter.
Rotate the adapter clockwise to tighten and secure the
rotary brush.
Pull gently on the rotary brush to confirm it is secure. It
should not pull out.
Next, attach the adapter to the lance extension by
aligning the ridges on the adapter with the grooves in
the extension lance.
Press together and rotate the adapter clockwise to
secure it.
Removing
Press the adapter towards the extension lance and
rotate it anti-clockwise to remove it.
7. fIxed bRuSh ASSembly (WG605e oNly)
Always use the fixed brush together with the lance
extension.
To attach the fixed brush to the extension lance an
adapter is needed.
Insert the fixed brushe into the open end of the brush
adapter.
Rotate the adapter clockwise to tighten and secure the
fixed brush.
Pull gently upon the fixed brush to confirm it is secure.
It should not pull out.
Next, attach the adapter to the lance extension by
aligning the ridges on the adapter with the grooves in
the extension lance.
Press together and rotate the adapter clockwise to
secure it.
Removing
Press the adapter towards the extension lance and
rotate it anti-clockwise to remove it.
Storage
Brushes may be stored in the brush compartment
located on the inner side of the handle shaft. (See Fig. Q)
8. uNdeRbody Nozzle (WG605e oNly)
ASSembly
Press the lock button on the standard lance (WG605E
only) and insert the underbody nozzle into the lance.
Align the ridge on the nozzle with the notch on the
lance. (See Fig. R1)
Release the button to secure the nozzle in place.
Check that the nozzle is firmly attached by pulling on it.
It should not pull out.(See Fig. R2)
Q
R1
R2
S
T
N2
O
P
L
M
N1
I
J
K