Worth Data 5000 TriCoder s, Owner'S Manual

Page: 40 / 126

39
Parity
I/O SETTINGS
HOST -----------------------------
SERIAL 1
TERMINATOR CHARACTER - CR 2
SINGLE CYCLE UPLOAD OFF 3
BAUD RATE ---------------------- 9600 4
PARITY --------------------------- NONE 5
DATA BITS ----------------------- 8 BITS 6
PROTOCOL ----------------------- NONE 7
DONE/EXIT ------------------------------------ 0
CHANGE SETTING #: _
o
The Parity should match the parity setting of your COM port setting on your Host Computer. Parity can vary on a PC serial
port - None is the default and is usually used in conjunction with the 8 data bits setting, while Even or Odd is associated
with 7 data bits.
o
Change the Parity by pressing the 5 key on the TriCoder keypad
Data Bits
I/O SETTINGS
HOST -----------------------------
SERIAL 1
TERMINATOR CHARACTER - CR 2
SINGLE CYCLE UPLOAD OFF 3
BAUD RATE ---------------------- 9600 4
PARITY --------------------------- NONE 5
DATA BITS ----------------------- 8 BITS 6
PROTOCOL ----------------------- NONE 7
DONE/EXIT ------------------------------------ 0
CHANGE SETTING #: _
o
Set the Data Bits to match the setting used by your serial port. 8 data bits is the default.
o
Change the Data Bi ts by pressing the 6 key on the TriCoder keypad to cycle through 7 BITS or 8 BITS.
Protocol
I/O SETTINGS
HOST -----------------------------
SERIAL 1
TERMINATOR CHARACTER - CR 2
SINGLE CYCLE UPLOAD OFF 3
BAUD RATE ---------------------- 9600 4
PARITY --------------------------- NONE 5
DATA BITS ----------------------- 8 BITS 6
PROTOCOL ----------------------- NONE 7
DONE/EXIT ------------------------------------ 0
CHANGE SETTING #: _
o
Set the Protocol to match the setting used by your program. None is the default.
o
Change the Protocol by pressing the 7 key on the TriCoder keypad to cycle through NONE, XON/XOFF or ACK/NAK.