30
Using the Hardware Utilities to change Setup Parameters
If you are using the
FULL SPEED USB
interface, you can use the
Integrated Hardware Utilities
program to change your setup
parameters. To use the
Hardware Utilities
, you must make sure your TriCoder is turned on, plugged into the computer with a C22
USB cable, and it is set for
Full Speed USB
interface. In the
Hardware Utilities
program, choose
TriCoder Manager
from the left
menu, and then click on the
Setup
button in the middle.
You will then see a screen offering the Setup options as shown below. Click on any of the tabs to change settings for that section.
Once you have made your changes, click
Update
and then
Done
and the changes are automatically made in your TriCoder.
