Workzone WB 20 User Manual Download Page 34

Page: 34 / 40

Hearing loss!

Exposure to noise may result in loss of hearing.
− Only work with suitable ear protection.
− Persons nearby must also wear suitable ear protection.

Noise disturbance!

This device causes a certain unavoidable noise disturbance.
− Perform noisy work during the permissible hours of the day

designated for work of this kind.

− If necessary, observe quiet hours and restrict the duration

of work to the essentials.

Disposal

Disposing of the packaging

Dispose of the packaging separated into single type
materials. Dispose of cardboard and carton as waste
paper and foils via the recyclable material collection
service.

Disposing of the cordless hammer drill

(Applicable in the European Union and other European states with
systems for the separate collection of reusable waste materials)

The device and its accessories are made of different materials such as
metal and plastic.

CAUTION!

Disposal

FILM

PLASTIC

not currently

recycled

BOX

CARD

widely

recycled

www.recyclenow.com

WZ-5451513-Bedien-1611_(24) 22.11.16 15:24 Seite 34

Summary of Contents for WB 20









































Search results

Summary of Contents for WB 20

Reviews:

Related manuals for WB 20

Brands by name

Popular brands

Workzone WB 20, User Manual

Search results

Summary of Contents for WB 20

Reviews:

Related manuals for WB 20

Brands by name

Popular brands