Workzone WB 20 User Manual Download Page 31

Page: 31 / 40

Problem

Possible cause

Solution

The cordless hammer

The rechargeable

Recharge the

drill cannot be started.

battery does not

rechargeable battery (8)

have enough power.

(see chapter “Charging

the rechargeable
battery”).

The rechargeable

Push the rechargeable

battery has not been

battery all the way into

inserted properly.

the rechargeable
battery holder until the
rechargeable battery
locks into place.

Right-handed/left-

Push the right-handed

handed-rotation

or left-handed rotation

selector (6) is in the

selector all the way in.

middle position.

The rechargeable

Push the rechargeable

battery does not

battery has not been

battery into the

charge.

inserted properly.

charger (18) so that the
contacts of the
rechargeable battery
extend into the charger.
The rechargeable
battery must lock into
the charger.

The mains plug has

Check to make sure that

not been inserted

the mains plug is

properly.

properly seated.

The socket has no

Check the socket by

power.

connecting another
device.

The rechargeable

Contact the After Sales

battery or the charger

Support.

is defective.

Troubleshooting

WZ-5451513-Bedien-1611_(24) 22.11.16 15:24 Seite 31

Summary of Contents for WB 20









































Search results

Summary of Contents for WB 20

Reviews:

Related manuals for WB 20

Brands by name

Popular brands

Workzone WB 20, User Manual

Search results

Summary of Contents for WB 20

Reviews:

Related manuals for WB 20

Brands by name

Popular brands