Cleaning
22
www.coreservice.co.uk
AFTER SALES SUPPORT
22
GB IRE
GB
0190 4727501
IRE
0190 22605
NOTICE!
Risk of damage!
Cleaning the compressor with unsuitable cleaners could damage it.
− Never clean the compressor with water, solvents or similar.
− Do not use any aggressive cleaners, sharp or metallic cleaning utensils
such as knives, hard scrapers or similar. They could damage the surfaces.
NOTICE!
Risk of damage!
Improper or irregular cleaning and maintenance could damage the compressor.
− Do not in any case open the housing.
− Keep all protective devices, vents and the motor housing as free of dust
and dirt as possible.
− Clean the compressor regularly, ideally directly after you finishing work.
1. Set the On/Off switch
1
to the “0” position.
2. Disconnect the mains plug before cleaning.
3. Let the compressor cool off completely.
4. Open the drain valve
16
to completely bleed the compressor until no more air is
released.
5. Disconnect the connected pneumatic tools before you clean the compressor.
6. Rub off the compressor with a clean cloth or blow the compressor off with com-
pressed air at low pressure to remove dust and dirt.
7. Let all parts dry completely.
Replacing the mains connection line
WARNING!
Risk of electric shock!
If the mains connection line is damaged or is improperly mounted, there is a
risk of electric shock.
− The mains connection line may only be replaced by the manufacturer, its
customer service or a similarly qualified specialist to avoid risks.
− If the mains connection line of this compressor is damaged, have it replaced by a
qualified specialist before using the compressor again.
Summary of Contents for PT15101201
