background image

Safety

10

www.coreservice.co.uk

AFTER SALES SUPPORT

10

GB IRE

GB

 0190 4727501 

IRE

 0190 22605 

Residual risks

Despite proper use, inconspicuous residual risks cannot be completely ruled out.
The following risks may arise due to the nature of the compressor:

•  Hearing loss in the event of failure to use the required ear protection.

ATTENTION! When using power tools, the following basic safety measures must be 

taken in order to provide protection against electric shocks, risk of injury and fire.
Read all these notes before using the power tool and keep the safety notes in a safe 

place. Failure to follow the safety notes and instructions may result in an electric 

shock, fire and/or severe injury.
The user manual and, in particular, the safety notes must be carefully read and ad-

hered to by each user before beginning work.
Work on this device may only be performed by persons who have been instructed in 

how to use the compressor and who have been advised on the associated risks.
The manufacturer of the compressor is not liable for damages caused by the compres-

sor or damages to the compressor in the event of:

•  improper handling or improper use,
•  failure to comply with the user manual,
•  repairs by a third party, unauthorised specialist workshops,
•  installation and replacement of non-original replacement parts,
•  failures of the electrical system due to failure to comply with electrical guide-

lines and provisions.

In addition to the safety guidelines in this user manual, please be absolutely sure to 

observe the regulations for operating the compressor that are in force in your country.
In addition to the safety notes in this user manual and the special regulations for your 

country, the generally recognised technical rules for operating this compressor must 

be observed.

Safety notes

Attention! When using this compressor, the following general safety meas-

ures must be taken in order to provide protection against electric shocks, 

risks of injury and fire. 

Read and take note of these instructions before you use the device.

1. Keep your work area orderly.

•  Disorganisation in your work area poses a risk of accident.

2. Take any environmental factors into account.

•  Do not expose the compressor to rain.

Summary of Contents for PT15101201

































Reviews: