Workzone PT15101201, User Manual

Page: 17 / 32

Use
17
www.coreservice.co.uk
AFTER SALES SUPPORT
GB
0190 4727501
IRE
0190 22605
GB IRE
Use
NOTICE!
Risk of damage!
The compressor is not suitable for continuous operation. The compressor will
overheat if operated continuously for an excessive amount of time or if over-
loaded. It could be damaged as a result.
− Never operate the compressor for longer than 10 minutes at a time.
− The compressor may only be operated with the rated input power for
15 % of the operating time, that is, for 1.5 minutes. The compressor will
cool off the rest of the time.
− Switch the compressor off after no later than 10 minutes of continuous
operation and let it cool off for at least 10 minutes.
Do not exceed the permissible power range of compressor. Do not inflate any lorry,
tractor or other large tyres.
NOTICE!
Risk of damage!
Operating the compressor with long feed lines, extension cords or cable drums
could cause a voltage drop and prevent the motor from starting.
− If possible, do not use any long lines, extensions or cable drums.
− An undersized air pressure system can affect the efficiency of your device.
NOTICE!
Risk of damage!
The compressor will vibrate during operation. If you set up the compressor in an un-
suitable location, you could damage it.
− Place the compressor on an easily accessible, level, dry and sufficiently stable
work surface. Do not place the compressor on the edge of the work surface.
− During operation, always place the compressor on the rubber feet or set it on
the underside.
− Do not place the compressor on or near hot surfaces.
− Set the compressor up in a location with dry and clean air. Do not use it in wet
rooms and in areas where work is performed with spraying water or in the rain.