Workzone PT15101201, User Manual

Page: 12 / 32

Safety
12
www.coreservice.co.uk
AFTER SALES SUPPORT
12
GB IRE
GB
0190 4727501
IRE
0190 22605
12. Prevent accidental start-up.
• Ensure that the switch is off when inserting the plug in the socket.
13. Use an extension cord when working outdoors.
• When outside, only use an extension cord that is approved for such use and
which is labelled accordingly.
14. Remain attentive.
• Pay attention to what you are doing. Approach work in a reasonable manner. Do
not use the compressor if you are unconcentrated, tired or under the influence of
drugs, alcohol or medication.
15. Check the compressor for any damages.
• Before you use the compressor, the protective devices or easily damaged parts
must be carefully checked for functioning properly and as intended.
• Check to make sure that moving parts are fully functional, that they are not
jammed and that the parts are not damaged. All parts must be properly mounted
and fulfil conditions to ensure proper operation of the compressor.
• Damaged protective devices and parts must be properly repaired or replaced by
an authorised workshop to the extent not otherwise specified in the user manu-
al.
• Damaged switches must be replaced by a customer service workshop.
• Do not use any power tools if the switch cannot be turned on and off.
16. ATTENTION!
• For your own safety, only use accessories and auxiliary equipment specified in
the instruction manual or recommended or specified by the manufacturer. Using
insertion tools or accessories other than those specified in the user manual or
recommended in the catalogue may pose a personal risk of injury for you.
17. Have your power tool repaired by an electrical technician.
• This power tool complies with applicable safety regulations. Repairs may only
be performed by an electrician who uses original replacement parts; otherwise,
there is a risk of accident for the operator.
18. Noise.
• Wear ear protection when using the compressor.
19. Replacement of the connector cable.
• If the connector cable is damaged, it must be replaced by the manufacturer or an
electrician to avoid risks.