Cleaning
21
www.coreservice.co.uk
AFTER SALES SUPPORT
GB
0190 4727501
IRE
0190 22605
GB IRE
2. Screw the hose
18
off of the pneumatic gun.
3. Screw the air blow gun nozzle
13
onto the pneumatic gun.
4. Connect the pneumatic gun to the compressor as described in the chapter
“Connecting the pneumatic gun”.
5. You can now switch the compressor on as described in the chapter
“Switching the compressor on and off”.
Cleaning
WARNING!
Danger of explosion!
The compressor or the attached tools may be in a pressurised state.
− Bleed the compressor completely before performing any cleaning and
maintenance.
− Regularly maintain the compressor and have necessary maintenance and
repair work performed without delay.
WARNING!
Risk of electric shock!
Water that has penetrated the housing may cause a short circuit. There is a risk
of electric shock.
− Never immerse the compressor in water.
− Never use a high-pressure cleaner to clean the compressor.
− Make sure that no water penetrates the housing.
− Pull the mains plug each time before you clean the device.
− Disconnect all tools before you clean the compressor.
WARNING!
Burn hazard!
The compressor will become hot during operation.
− Each time before you clean the compressor, let it cool off completely.
Summary of Contents for PT15101201
