PH: 866.476.9217
8
III. SPECIFICATIONS
To operate the GO-E2 efficiently the user should be familiar with each of the Gate
Opener's Components. See Figure 1 for component Layout and the following pages for
item descriptions.
The
GO-E2
Gate Opener consists of a heavy-duty, 5 HP. Gear Motor; a Telescoping
Driveshaft (TDS) with universal joints on each end to enable the TDS to angle up to 20°
off-center on either end; an electrical Control Package in a NEMA-4 watertight enclosure
which contains a reversible starter, transformer and overload protection, and a hand
held, watertight, momentary contact, Forward/Reverse, Pushbutton Pendant Control
with 50' L cord. Also, included is a tapered Capstan Drive Fitting which is attached to
the Driveshaft and a Capstan Swage to clean-out and square-up the capstan sockets on
hopper car gate spindles.
Figure 1: Component Layout
1
2
3
4
5
6
7
Summary of Contents for GO-E2
